What to look for when searching for a Dental Lab?

June 29, 2018


As a dental lab in the US, we pride ourselves in being reputable both in quality and integrity.

The highest regard in terms of manufacturing certifications available to dental laboratories are through the International Organization for Standardization (ISO). The ISO develops standards through the consensus of standards organizations from more than 150 countries. These members represent both the private as well as public sectors of countries all around the globe. ISO standards are thought to represent the utmost interests and needs of the broader global society.

There will constantly be a need for talented dental lab technicians to create restorations and dental devices, especially ones of the highest quality. While improvements in technology and materials that’s commonly used in dentistry will allow dentists and their trained team members to make more of these products themselves

A wide range of institutions offer associate degree programs to become a technician. In addition, an interested person can complete an apprenticeship program that have lasted for five years. After the apprenticeship or associate degree has been finished, the candidate will need to pass an test that is administered directly by the National Board for Certification in Dental Laboratory Technology

Throughout our history, Oceanic Dental Lab has developed clear core values, all aimed at creating the highest level of customer satisfaction. Our goal is to be an undisposable part of your team with our highest calling being to assist you the dentist in creating patient satisfaction, translating to enhancing your clinic’s bottom line and professional fulfillment of dentists nationwide.

Lithium Discilicate, Emax, Lisi Press

April 23, 2018

 IPS e.max Lithium Disilicate Glass Ceramic




For more than thirty years, metal ceramic restorations have been considered the restorative materials of choice in dentistry.[1] Their good mechanical properties met the requirements of dental clinicians, while their reasonable esthetics satisfied the tastes of patients.


However, with patients’ increasing interest in life-looking restorations instead of artificial ones, and with the growing concerns regarding the biocompatibility of the metal, researchers have been on the run to find novel restorative materials.


The quest to find a material that transmits and refracts light like a natural tooth has inspired research into all-ceramic restorations. In the last two decades, a number of all-ceramic materials have been available for dental restorations. Among these materials, Lithium Disilicate Glass Ceramic is considered one of the most popular due to its high strength, good color stability, high resistance to wear, and high biocompatibility.[2]


Lithium Disilicate excellent esthetics and good biomechanical properties make it suitable for the fabrication of monolithic restorations and veneered restorations in the anterior and posterior region.



Composition of Lithium Disilicate Glass Ceramics:


Lithium disilicate glass ceramic, particularly Li2O-SiO2 system, is the first material classified as glass ceramic. Discovered by Stookey in the fifties, glass ceramics have proved to have better mechanical properties over base glass.[3][4] Since then, the binary Li2O-SiO2 system have been extensively studied and applied in dental restorations.


However, studies have shown that the binary Li2O-SiO2 system has poor chemical durability, inadequate translucency and uncontrolled microcrack formation. Therefore, researchers started to opt for multicomponent glass ceramic, notably adding components such as Al2O3 and K2O to lithium silicate glasses which have been proved to promote the thermo-mechanical properties of the final material.[5]


Several other constituents like ZnO, ZrO2 and P2O5 were also introduced to further improve the properties of glass ceramic.[6] For example, the addition P2O5 can promote the nucleation and crystallization processes in lithium disilicate glasses.[7] For that reason, the adjunction of phosphorus oxide produces fine-interlocking microstructure and therefore resulting in high mechanical strength of the final material.[8]



Manufacturing & processing of IPS e.max lithium disilicate:


In 2005, Ivoclar Vivadent introduced the IPS e.max lithium disilicate glass ceramic. 11 years after its release, this all-ceramic material has been used in more than 100 million restorations with more than 96 percent success rate.[9]


The IPS e.max lithium disilicate is composed of quartz (SiO2), lithium dioxide (Li2O), phosphorus oxide (P2O5), alumina (Al2O3), potassium oxide (K2O), and other components. These powders are combined to produce a glass melt which is then poured in molds to cool down to room temperature. The partially crystallized glass ingots, containing lithium metasilicate (Li2SiO3) and lithium disilicate (Li2Si2O5) crystal nuclei, are then processed differently depending on each technique.


The IPS e.max CAD (Computer aided design) “blue block” is milled and shaped by a computer. The milling procedure doesn’t engender excessive bur wear or chipping of the material, and that is due to the presence of the intermediate lithium meta-silicate crystal structure (Li2SiO3).

A post-milling heat treatment of the partially crystalized fabricated ceramic restoration at approximately 840-850ºC dissolves completely the metasilicate phase and crystallizes the lithium disilicate phase. This heat treatment allows the fabricated restoration to achieve its full density and strength.


For lithium disilicate ceramics, the final crystallization is achieved after only 25 minutes of heat treatment, allowing faster delivery of restorations.[10] In contrast, a zirconia core machined by CAD/CAM can require up to 8 hours of post-milling processing time.[11]


Throughout the heating process, the initially bluish color of the glass ingot changes to a tooth-like shade. In contrary to alumina- or zirconia-based ceramic cores, lithium disilicate ceramic doesn’t require additional porcelain layering for esthetic improvement. A staining procedure is sufficient to give the lithium silicate-based restoration a realistic tooth-like appearance, allowing the initial block to be milled to the final contour.


The glass ingots can also be processed using the lost-wax hot pressing technique (IPS e.max Press). The ingots are processed similarly to the IPS e.max CAD, as they are composed of different powders that are melted and cooled to room temperatures. Following the glass formation, ingots are nucleated and crystallized in one heat treatment. These ingots are then pressed at approximately 920ºC for 5-15 minutes to form a 70% crystalline lithium disilicate restoration.


The crystals of both the IPS e.max Press and IPS e.max CAD are the same in composition (70% of crystalline lithium disilicate Li2Si2O5), but the size and length of these crystals are different. Hence why the material properties such as the coefficient of thermal expansion, modulus of elasticity, and chemical solubility are the same, while fracture strength and fracture toughness are slightly higher for the IPS e.max Press.[12]





The flexural strength of dental restorative materials represents the capacity to tolerate chewing force.[13] As shown in Figure 1, the flexural strength of IPS e.max CAD can reach 360 MPa, while it can go up to 400 MPa for IPS e.max Press. These values are twice greater than those of other ceramic materials that do not require any layering material.


Lithium disilicate glasses offer the same value of flexural strength through the entire restoration. As a result, restorations showcase a monolithic strength that can resist masticatory stress especially in the posterior region. The even distribution of stress without concentration sites is crucial in clinical outcomes. Stress concentration sites in ceramic restorations can result in surface flaws, porosities, and internal disintegration.[14]


Figure 1: Comparison of the flexural strength of pressed ceramics.[15]

* Not registered trademarks of Ivoclar Vivadent AG


Besides strength testing, a chewing simulation testing performed on various restorative material for crowns (e.g leucite glass ceramic, metal ceramic, zirconia) to examine the nature of fatigue on these materials, showed that lithium disilicate demonstrates superior results.[16]


From an esthetic standpoint, ceramics are the best when it comes to mimicking the natural tooth appearance.[17] The optical behavior of ceramic materials differ from system to system and this should be taken into consideration during the selection of which system to be used.[18] Lithium disilicate material is very versatile, as its availability in four translucencies allows its usage in different types of restorations (Veneers, Inlays/Onlays, anterior crowns, posterior crowns, etc.).

Wear resistance and compatibility are vital properties of all restorative materials. In some cases, the wear can concern the restorative material itself (e.g composites), while in case of lithium disilicate and other ceramic materials, the wear concerns more the enamel of the antagonist  tooth. The wear of the opposing enamel by lithium disilicate is considered to be the lowest when compared to other ceramics and even enamel.[19]


The biocompatibility of ceramic materials have been extensively studied. In 2008, Brackett, Wataha, and others[20] examined the cytotoxicity response of lithium disilicate materials and concluded that: “In spite of the mitochondrial suppression caused by the lithium disilicate materials in the current study, these materials do not appear to be any more cytotoxic than other materials that are successfully used for dental restorations. The lithium disilicate materials were less cytotoxic than several commonly used composite materials and were comparable to cytotoxicity reported for several alloys and glass ionomers.”


Dental Applications of IPS e.max lithium disilicate glass ceramic:


The lithium disilicate (LS2) IPS e.max effectively merges esthetics and efficiency. The high-strength glass-ceramic can be applicated in a variety of clinical situations. The indication spectrum ranges from thin veneers (0.3 mm) and minimally invasive inlays and onlays to partial crowns, full crowns[21] and implant superstructures.[22] The material is also suitable for fabricating crowns, splinted crowns or 3 unit bridges up to the second premolar on top of implant abutments. In addition, three-unit bridges in both the anterior region and the premolar region can be produced. Lithium disilicate is also used to fabricate posterior bridges as long as it is supported by zirconium oxide.

The concept of modern dentistry is preserving as much saine tooth structure as possible. This modern vision has instructed clinicians to opt for minimally invasive restorations. IPS e.max lithium disilicate has enamel-like properties, hence offering durable solutions for restoring the function, esthetics and biomechanics of teeth when using conservative techniques. The combination of the high flexural strength, ideal fracture toughness and clinical longevity of IPS e.max lithium disilicate allow the fabrication of full-contour crowns of only 1 mm thickness, which then can be placed using the adhesive cementation method.

Posterior restorations withstand high stresses resulting from masticatory forces. The masticatory loading in posterior regions questions the durability of minimally invasive restorations in said regions. Several studies showed that the superior mechanical properties of Lithium disilicate make it suitable for the fabrication of posterior restorations.[23]

Although the flexural strength of zirconia is 2.5 times higher than lithium disilicate glass ceramic, the relative load-bearing capacity changes when both of these materials are bonded to and backed by tooth structures.

When supported by dentin, the fracture load of zirconia restorations is about 1.8 times higher than lithium disilicate glass-ceramics. This ratio drops dramatically to only 1.3 times when the restorations are supported by enamel backed by dentin. This is noticeable when ceramic restorations thickness varies between 0.6 mm and 1.4 mm, implying that lithium disilicate can be convenient for use in conservative restorations in which the preparation can be confined to enamel.[24]

IPS e.max lithium silicate glass ceramics offer a wide variety of translucency levels. Therefore, practitioners can camouflage dark tooth structure that results from stained teeth or titanium abutments. You can inform the laboratory about the shade of the tooth structure, and the dental technician will pick the IPS e.max lithium disilicate ingot with the suitable opacity level for maximum esthetic results.


Contraindications of IPS e.max lithium disilicate:


All-ceramic materials have a major drawback represented in their susceptibility to fatigue mechanisms, which can remarkably diminish their strength resulting in higher risks of fracture. The mastication forces can reach 250 N, while the forces due to clenching/grinding can reach up to 800 N.[25]


The rehabilitation of heavily abraded occlusion on patients with parafunctional habits is a major challenge in restorative dentistry. Therefore, patients with increased chewing forces due to bruxism or other, can not benefit from all-ceramic crowns, including lithium disilicate ones.[26] Special design features, such as cantilevers, maryland bridges, inlay retained

bridges are also considered to be a contraindication for all-ceramic restorations.[27]


On their turn, wide spans (4 and more unit bridges) and posterior bridges reaching into the molar region are not recommended to be fabricated using all-ceramic systems.


Other contraindications of lithium disilicate IPS e.max can be deep subgingival preparations and failure to observe the necessary minimum connector dimensions and layer thicknesses.




Since its release, IPS e.max lithium disilicate glass ceramics showcased outstanding clinical performance. The Oceanic Dental Laboratory offers dental clinicians across Australia the chance to meet the expectations of their patients with e.max crowns, bridges and inlays. The perennity of IPS e.max lithium disilicate monolithic restorations can give credibility to your practice and, on the long run, help you generate organic leads. Until the release of a new all-ceramic system with a wider spectrum of applications, the lithium disilicate IPS e.max will offer a great chance for dental clinicians to match intraoral and esthetic requirements.




[1] Phillips’ Science of Dental Materials, edl1. Saunders, 2003

[2] Braga RR, Ballester RY, Daronch M. Influence of time and adhesive system on the extrusion shear strength between feldspathic porcelain and bovine dentin. Dental Materials. 2000; 16(4):303-310.

[3] S.D. Stookey, Ind. Eng. Chem., 51, 805 (1959).

[4] P. W. McMillan, Glass-Ceramics, Academic Press, London, UK, 1979.

[5] D. U. Thlyaganov, S. Agathopoulos, I. Kansal, and P. Valerio, “Synthesis and properties of lithium disilicate glass-ceramics in the system SiO2-Al2O3-K2O-Li2O,” Ceramics International, vol. 35, no. 8, pp. 3013–3019, 2009.

[6] X. Zheng, G. Wen, L. Song, and X. X. Huang, “Effects of P2O5 and heat treatment on crystallization and microstructure in lithium disilicate glass ceramics,” Acta Materialia, vol. 56, no. 3, pp. 549–558, 2008.

[7] Y. Iqbal, W. E. Lee, D. Holland, and P. F. James, “Crystal nucleation in P2O5-doped lithium disilicate glasses,” Journal of Materials Science, vol. 34, no. 18, pp. 4399–4411, 1999.

[8] S. C. von Clausbruch, M. Schweiger, W. Höland, and V. Rheinberger, “The effect of P2O5 on the crystallization and microstructure of glass-ceramics in the SiC2-Li2O-K2O-ZnO-P2O5 system,” Journal of Non-Crystalline Solids, vol. 263-264, pp. 388–394, 2000.


[10] Reich S, Schierz O. Chair-side generated posterior lithium disilicate crowns after 4 years. [updated 2012 Nov 8];Clin Oral Investig.

[11] Fasbinder DJ. Materials for chairside CAD/CAM restorations. Compend Contin Educ Dent. 2010;31:702–704. 706, 708–709.

[12] IPS e.max lithium disilicate: The Future of All-Ceramic. Link:

[13] Charlton DG, Roberts HW, Tiba A. Measurement of select physical and mechanical properties of 3 machinable ceramic materials. Quintessence Int. 2008;39:573–579.

[14] Siarampi E, Kontonasaki E, Papadopoulou L, Kantiranis N, Zorba T, Paraskevopoulos KM, Koidis P. Flexural strength and the probability of failure of cold isostatic pressed zirconia core ceramics. J Prosthet Dent. 2012;108:84–95.

[15] Wear of ten dental restorative materials in five wear simulators—Results of a round robin test

Heintze, S.D. et al. Dental Materials , Volume 21 , Issue 4 , 304 – 317

[16] Using a chewing simulator for fatigue testing of metal ceramic crowns. Journal of the Mechanical Behavior of Biomedical Materials, Volume 65, Issue null, Pages 770-780. S.D. Heintze, A. Eser, D. Monreal, V. Rousson

[17] Griggs JA. Recent advances in materials for all-ceramic restorations. Dent Clin North Am. 2007;51(3):713-27,viii.

[18] Raptis NV, Michalakis KX, Hirayama H. Optical behavior of current ceramic systems. Int J Periodontics Restorative Dent 2006;26(1 ):31-41.

[19] Wear of Enamel against Dental Ceramics. Sorenson, et al. J Dent res. Vol 78, 1999 #909

[20] In vitro cytotoxic response to lithium disilicate dental ceramics. Brackett, Martha Goël et al.

Dental Materials , Volume 24 , Issue 4 , 450 – 456

[21] Clinical evaluation of 121 lithium disilicate all-ceramic crowns up to 9 years. Toman M, Toksavul S. Quintessence Int. 2015 Mar;46(3):189-97.

[22] Retentive strength of monolithic all-ceramic crowns on implant abutments. Weyhrauch M, Igiel C, Wentaschek S, Pabst AM, Scheller H, Weibrich G, Lehmann KM. Int J Comput Dent. 2014;17(2):135-44


[23] Rekow ED, Silva NR, Coelho PG, Zhang Y, Guess P, Thompson VP. Performance of dental ceramics: challenges for improvements. Journal of Dental Research. 2011;90:937–52.

[24] Load-bearing properties of minimal-invasive monolithic lithium disilicate and zirconia occlusal onlays: Finite element and theoretical analyses. Ma, Li et al. Dental Materials , Volume 29 , Issue 7 , 742 – 751

[25] Studart AR, Filser F, Kocher P, Gauckler LJ. Fatigue of zirconia under cyclic loading in water and its implications for the design of dental bridges. Dent Mater. 2007;23:106–14.

[26] van Dijken JW, Hasselrot L. A prospective 15-year evaluation of extensive dentin-enamel-bonded pressed ceramic coverages. Dental Materials. 2010;26:929–39.

[27] Conrad HJ, Seong WJ, Pesun IJ. Current ceramic materials and systems with clinical recommendations: A systematic review. J Prosthet Dent. 2007;98:389–404.

Talon Occlusal Splints

April 23, 2018

Talon Occlusal Splint: A Must-Have Treatment Option for Every Dental Practice

According to the Glossary of Prosthodontic Terms [8th ed.], “occlusal splint is defined as any removable artificial occlusal surface used for diagnosis or therapy affecting the relationship of the mandible to the maxilla. It may be used for occlusal stabilization, for treatment of temporomandibular disorders, or to prevent wear of the dentition.”

TMJ dysfunction or temporomandibular disorder is a broad term used to describe the pain and abnormal functioning of the muscles of mastication and the muscles that are responsible for temporomandibular joint function. This can happen as a result of blow on the joint area or face, malaligned teeth, inflammatory or degenerative arthritis or due to parafunctional activity like bruxism.

Bruxism is the habit of involuntary grinding and clenching of teeth specifically during sleep. As it happens without the knowledge of the patient, it is difficult to diagnose in the initial stage. This habit can play havoc with the entire stomatognathic system as the side effects are plenty like headache, muscle soreness, heavy attrition of teeth resulting in sensitivity and so on.

Occlusal splints, the sure-shot solution for this problem, work by achieving occlusal stabilization. It is basically, the technique of equalizing the tooth contacts on the occlusal aspect so that there is no tooth movement once the mandible is in the state of closure. That is why, occlusal stabilization is essential for the teeth, TMJ and the jaw muscles to function optimally. The main objective of using an occlusal splint is to guard the TMJ discs against traumatic or excessive forces that can perforate or even displace the discs permanently. The primary focus is on achieving a stable occlusion so that there is an improvement in muscle function and any pain related to the condition is also alleviated.

Talon Occlusal Splints: Why are they a class apart?

As a matter of fact, occlusal splint therapy is considered as the safest, extremely effective and non-invasive treatment modality to cure or relieve TMJ dysfunction. Oceanic Dental laboratory takes pride in providing to the partner dentists one of the most innovative technology in splint therapy: Talon occlusal splints.

Talon occlusal splints are made of a unique thermoplastic material with an exquisite combination of properties like flexibility and durability. As the material is soft and flexible it offers great comfort and snug fit to the patient. Here are some more reasons why we consider Talon occlusal splints as the most preferred option-

  1. 1. No Leaching– There is no leaching of plasticizers from the splints into the oral cavity. This property ensures that the material does not undergo deterioration and guarantees longevity to the appliance.
  2. 2. Shape memory– The material has a property of shape memory which means that it can revert to its original shape even after undergoing plastic deformation.
  3. Enhanced retention– Talon occlusal splints become soft when immersed in warm water. This flexibility is extremely handy while inserting the splint in the patient’s mouth. During insertion, the softened splint flows into the undercuts thereby enhancing the retention of the appliance. As the material cools, it hardens to ensure a good fit. Talon occlusal splints eliminate the use of clasps for retention.
  4. Superior wear resistance– This material has high wear resistance similar to that of the hard acrylic surface.
  5. 5. Versatile– Another important feature of this material is that it has a wide range of utility. It can be used for any design of splints. Hence, it can be considered as an ideal treatment option for bruxism, orthodontic stabilization or TMJ dysfunction.
  6. No warping– There is almost negligible warping and the Talon occlusal splints maintain their flexibility for years together.

Talon thermoplastic material has been laboratory tested extensively and has yielded outstanding results. That is why it has become the most desirable choice of material for splint therapy. Being the leading Australian laboratory provider with high-end technology and top-notch quality service, Oceanic Dental Laboratory USA ensures to keep itself abreast with the latest innovations in the world of dentistry.

So, if you are looking for splints that fit comfortably and function hassle-free, Talon occlusal splints are all you need. Contact our experts at Oceanic Dental Laboratory USA to learn more.

How to Find the Right Type of Denture

February 7, 2018

There’s a wide range of reasons you might be considering dentures. Whether it’s a cosmetic decision or to reduce pain in your mouth, finding the right type of dentures is key to help reduce problems in your mouth that you’re currently facing.


What Exactly are Crowns & Bridges?

September 26, 2017
dental crown and bridge

Crowns and bridges are both fixed prosthetic devices. They are used to cover damaged or weakened teeth or fill gaps where teeth are missing. They can also be used as a cosmetic option to give you a brighter fuller smile without gaps or broken teeth.

Technology advancements have come a long way and laboratory made bridges and crowns are now made to look natural and unnoticeable. They can last up to a lifetime but most current crowns and bridges usually last between 5 and 15 years.


Hawley Retainers or Begg Retainers – Which is Best for You?

August 3, 2017
orthodontic retainer

Choosing the correct type of retainer can be a tricky business. There are several options available, and each one has pros and cons associated with it. This article will go over the Hawley Retainer and the Begg Retainer. It will list pros and cons of each one, as well as who they are best suited for.


Choosing the Perfect Type of Dental Crown

May 31, 2017
dental crowns

A dental crown (often referred to as a crown – or a cap) is a tooth-restoring apparatus. Its applications are many. Primarily, a crown is used when a tooth is accidentally cracked, severely decayed to the point where fillings won’t suffice or when its cavities are so extensive that a large amount of it gets drilled away. Crowns are also employed to strengthen anchor teeth to support a bridge or to create a tooth on a dental implant.


6 Benefits of Getting a Hollywood Smile

March 21, 2017
Dental Veneers

The ‘Hollywood smile’ is associated with those perfect pearly whites flashed by celebrities. We see them planted all over magazines and TV – and it doesn’t take us long to realise that a sparkling set of pearly whites are often the secret behind a winning smile, not to mention those Hollywood good looks. Getting the perfect smile doesn’t just stop there thoug
h. Reducing gaps between teeth, encouraging whiter and brighter smiles and other dazzling differences all contribute to giving you that Hollywood beam.


The Best Types of Fixed Restorative Dental Work

March 21, 2017
fixed restorative dental work

Natural teeth are meant to last you a lifetime. Unfortunately, this is not the case for most of us. Dentists work hard to preserve natural teeth by performing several restorative procedures that hide minor imperfections and strengthen the tooth. Preserving your teeth in the best possible way is an investment that shouldn’t be taken lightly. Because your teeth act as anchors for one another, one missing or detrimental tooth can affect your entire mouth.

Restorative dental work helps by installing an implant, denture or bridge to provide the necessary stabilization. Whether your teeth have been damaged because of decay or trauma, getting restorative dental work can be one of the best things for you. Here’s a few of the most common procedures to consider.